Installation Guide

 67  [e-mail]
4 x 1/4 x 1-1/2” Lag Screw (1/4” at washer)
Pre-drill all holes using a 1/8” drill bit before installing Lag Screws.
A:PlaceRockWallAssemblyfromStep2centredonandushtotopof(2563)Joist.Attach(0349)RockRailsto
(2563)Joistusing4(S15)#8x1-3/4”WoodScrewsasshowning.31.1,31.2and31.3.
B: OntheBackWallmeasure1-1/2”upfromthetopof(2563)Joistandattach1HandGripto(0945)ShortPost
and(0955)LongPostwith2(LS1)1/4x1-1/2”LagScrews(withatwasher)perHandGrip.(g.31.1,31.2and
31.3)
Hardware
4 x #8 x 1-3/4” Wood Screw
Fig. 31.1
x4
Flush
Back Wall
Step 31: Attach Rock Wall to Fort
Part 1
1-1/2”
Fig. 31.2
Fig. 31.3
LS1
1/4”Flat
Washer
LS1
0349
0349
0955
0945
2563
Hand
Grip
Hand
Grip
Hand
Grip
2 x Hand Grip
Other Parts
S15
S15
Side View