Installation Guide

 66  [e-mail]
Step 30: Connect Monkey Bar Assembly to Fort
Part 3
E:Drive1(0318)GroundStake10-1/2”intothegroundatone(2580)Postontheinsideoftheassemblyandattach
with2(S3)#8x2-1/2”WoodScrews.(g.30.6and30.7)
Hardware
Wood Parts
2 x #8 x 2-1/2” Wood Screw
S3
Fig. 30.6
Fig. 30.7
10-1/2”InGround
2580
1 x Ground Stake 1-1/4 x 1-1/2 x 14”
0318
WARNING: To prevent tipping and avoid potential injury, stakes must
be driven 10-1/2” into ground. Digging or driving stakes can be dangerous
if you do not check rst for underground wiring, cables or gas lines.
S3
0318