Installation Guide

 61  [e-mail]
3483
Hardware
Step 28: Bench Assembly
Part 2
Flush
BenchLeg
Assembly
1”
D:Place2(3483)BenchTopCafestogetherwithangledcornersfacingoutwardsand(3983)BenchBraceTop
centredunderthepilotholesasshowning.28.3.Pre-drillwitha1/8”drillbitthenattach(3983)BenchBrace
Toptoboth(3483)BenchTopCafeswith4(S15)#8x1-3/4”WoodScrewsasshowning.28.3.
E: Placeboth(3483)BenchTopCafesonbothBenchLegAssembliessotheendsoneachsidehangoverby
1”.Outsideedgesofeach(3483)BenchTopCafetobeushtotheoutsideedgeofeach(2578)SeatEnd.Pre-
drillwitha1/8”drillbitthenattacheach(3483)BenchTopCafetoeach(2578)SeatEndwith4(S15)#8x1-3/4”
WoodScrewsperboard.(g28.4)
Wood Parts
2 x Bench Top Cafe 5/4 x 4 x 31-1/2”
1 x Bench Brace Top 5/4 x 4 x 6”
3483
3983
12 x #8 x 1-3/4” Wood Screw
S15
S15
S15
3483
3983
S15
3483
3483
2578
2578
Fig. 28.4
Fig. 28.3
Note: Pre-drill all holes using a 1/8” drill bit before installing the Wood Screws.