Installation Guide

 60  [e-mail]
A: Flushtothetopof1(2484)BenchLegplace1(2578)SeatEndwithanglededgefacingdownandstraight
edgeushtotheinsideedgeof(2484)BenchLegasshowning.28.1.Attachwith2(S15)#8x1-3/4”Wood
Screwsand1(H3)1/4x2-1/2”HexBolt(withlockwasher,atwasherandt-nut).(g.28.1)
B:Flushtotheoutsideedgeof(2484)BenchLegattach(2495)BenchSupportwith1(H3)1/4x2-1/2”HexBolt
(withlockwasher,atwasherandt-nut).(g28.1)
C: RepeatStepsAandBtocreateasecondBenchLegAssemblysoitisoppositeoftherstBenchLeg
Assembly.(g.28.2)
Step 28: Bench Assembly
Part 1
4 x 1/4 x 2-1/2” Hex Bolt (1/4” lock washer, 1/4” at washer, 1/4” t-nut)
4 x #8 x 1-3/4” Wood Screw
Hardware
Fig. 28.1
2495
Fig. 28.2
Wood Parts
2 x Bench Leg 2 x 4 x 13-1/2”
2 x Bench Support 5/4 x 4 x 13-5/8
2 x Seat End 5/4 x 6 x 6-1/2”
2495
2484
2578
H3
H3
S15
H3
H3
2495
2484
2578
2484
2578
1/4”lock
washer
1/4”at
washer
1/4”
t-nut
1/4”
t-nut
1/4”at
washer
1/4”lock
washer
S15
S15
Note: Pre-drill all holes using a 1/8” drill bit before installing the Wood Screws.
Flush