Installation Guide

 59  [e-mail]
A:Drive3(0318)GroundStakes10-1/2”intothegroundtightto2(0369)LowerDiagonalsandto1(0955)
LongPostasshowning.27.1,27.2&27.3.Attachusing2(S3)#8x2-1/2”WoodScrewspergroundstake.
(g.27.2&27.3)
Wood Parts
Hardware
Fig. 27.1
6 x #8 x 2-1/2” Wood Screw3 x Ground Stake 1-1/4 x 1-1/2 x 14”
0318
S3
Step 27: Attach Ground Stakes
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND.
WARNING: To prevent tipping and avoid potential injury, stakes must
be driven 10-1/2” into ground. Digging or driving stakes can be dangerous
if you do not check rst for underground wiring, cables or gas lines.
Fig. 27.2
S3
0318
Fig. 27.3
0318
S3
10-1/2”IntoGround
0369
0955