Installation Guide
32 support@cedarsummitplay.com
A: WithboththeSwingWallandMiddleWallsfacingeachotherlooselyattach1(0976)FloorFrontBacktothe
insideofboth(0945)ShortPostsfromoutsidetheassemblyontheBackWallandfrominsidetheassemblyon
theFrontWallwith2(H11)1/4x23/4”HexBolts(withlockwasher,atwasherandt-nut)perboard.
B:Attach1(0939)GroundFrontBacktotheoutsideofeach(0945)ShortPostwith4(H2)1/4x2”HexBolt
(withlockwasher,atwasherandt-nut)perboard,asshowning.13.1.Notice the bolts attaching the front
(0939) Ground Front Back on the Middle Wall are attached from inside the assembly.
C: WiththeMiddleWallandMonkeyWallfacingeachotherlooselyattach1(0939)GroundFrontBacktothe
outsideofeach(0955)LongPostwith2(H2)1/4x2”HexBolt(withlockwasher,atwasherandt-nut)per
boardasshowning.13.1.Notice the bolts attaching the (0939) to the (0955) Long Post on the Front Wall
side are attached from inside the assembly.
HardwareWood Parts
12 x 1/4 x 2” Hex Bolt
(1/4” lock washer, 1/4” at washer, 1/4” t-nut)
4 x 1/4 x 2-3/4” Hex Bolt
(1/4” lock washer, 1/4” at washer, 1/4” t-nut)
H2
2 x Ground Front Back 1 x 5 x 75-1/2”
2 x Floor Front Back 2 x 4 x 45-1/2”
0939
0976
Step 13: Connect Wall Assemblies
Monkey
Wall
H11
1/4”lock
washer
1/4”
t-nut
1/4”at
washer
0945
0939
Swing Wall
Middle Wall
H2
0945
Fig. 13.1
Front Wall
H2
0976
0955
Noticet-nutsare
installedonthe
outside
Noticet-nutsare
installedonthe
outside
x6
x6
H11
H11
0945