Installation Guide

 29  [e-mail]
Step 10: Monkey Wall Assembly
A:Onthegroundlay2(0955)LongPostsonedgethenlooselyattach(0946)SLGroundwith4(H4)1/4x4”
HexBolts(withlockwasher,atwasherandt-nut);and(0965)SLFloorwith2(H6)1/4x4-3/4”HexBolts(with
lockwasher,atwasherandt-nut)asshowning.10.1.Maintain44”fromthebottomof(0955)LongPostsand
thebottomof(0965)SLFloor.Keep bolts loose.
B:Makesureassemblyissquareandthenfasten(2566)MKTopto(0955)LongPostswith4(H8)1/4x4-1/4”
HexBolts(withlockwasher,atwasherandt-nut).Tightenallbolts.(g.10.1)
Wood Parts
Hardware
4 x 1/4 x 4” Hex Bolt (1/4” lock washer, 1/4” at washer, 1/4” t-nut)
2 x 1/4 x 4-3/4” Hex Bolt (1/4” lock washer 1/4” at washer, 1/4” t-nut)
4 x 1/4 x 4-1/4” Hex Bolt (1/4” lock washer, 1/4” at washer, 1/4” t-nut)
2 x Long Post 2 x 4 x 87”
1 x SL Ground 1 x 5 x 41-1/2”
1 x SL Floor 2 x 4 x 41-1/2”
1 x MK Top 5/4 x 6 x 41-1/2”
2566
0946
0965
0955
H4
Fig. 10.1
H6
0955
0955
0946
0965
2566
H4
Notice the hole
locations
1/4”lock
washer
1/4”
t-nut
1/4”at
washer
H6
H8
x4
H6
44”
H8