Installation Guide

 26  [e-mail]
Step 7: Monkey Rail Assembly
Pre-drill all pilot holes using a 1/8” drill bit before installing Wood Screws.
Fig. 7.1
Fig. 7.3
Note:Pilotholesat
bottomofthisrail
A:Insert3(578)1-1/8x15-7/8”Dowelsintoboth(1565)MKRailShortsasshowning.7.1.Notethepilotholesin
oneofthe(1565)MKRailShortareonthebottomoftheboard.
C: Attach(578)1-1/8x15-7/8”Dowelstobothrailswith2(S4)#8x3”WoodScrewsperdowel.(g.7.3)
B:Makesureshoulderofdowelisagainst
eachrailbeforepre-drillingpilotholes.Drill
1/8”pilotholesthroughtherailsandintothe
dowelstopreventsplitting.(g.7.2)
Fig. 7.2
Wood Parts Hardware
6 x #8 x 3” Wood Screw
3 x Tennon Dowel 1-1/8 x 15-7/8”
2 x MK Rail Short 2 x 4 x 50”
578
1565
S4
1565
1565
1565
1-1/4”
1”
1-1/4”
S4
578
1565
1”
578
Note:Pilotholesat
topofthisrail