Installation Guide

 77  [e-mail]
Step 36: Slide Section Assemblies
Part 1
Note: When installing Pan Bolts make sure to look at holes so bolts go through the side with the
round recess and the lock nuts go through the side with the hexagonal recess. (g. 36.3)
A:
Fit2TNR2SlideElbowstogetherandattachwith8(PB1)1/4x3/4”PanBolts(withlocknut)asshownin
g.36.1.Itisveryimportanttoattachboltsasindicated,ing.36.3.
B: RepeatStepA3moretimestocreate4ElbowSectionsintotal.(g.36.1)
C:AttachTNR2SlideRTFlangeandTNR2SlideLTFlangetogetherusing4(PB1)1/4x3/4”PanBolts(with
locknut)asshowning.36.2.ThiscreatestheFlangeAssembly.
Hardware
36 x 1/4 x 3/4” Pan Bolt
(1/4” lock nut)
PB1
Other Parts
1 x TNR2 Slide LT Flange
1 x TNR2 Slide RT Flange
8 x TNR2 Slide Elbow
Use a 7/16” open end
wrench for nuts
PB1
TNR2
Slide
Elbow
Lock
Nut
TNR2
SlideRT
Flange
TNR2
SlideLT
Flange
PB1
TNR2
Slide
Elbow
Lock
Nut
Lock
Nut
Lock
Nut
PB1
PB1
Flange
Assembly
Fig. 36.1
Fig. 36.2
Fig. 36.3