Installation Guide

 76  [e-mail]
1 x SL Support 2 x 4 x 26-1/4”
1 x SL Block 2 x 4 x 10”
Wood Parts
1450
0968
2428
1450
2585
Hardware
1400
Fig. 35.2
Fig. 35.1
Tight
Step 35: Attach SL Support and SL Block to Fort
A:Attach(1450)SLSupporttoendof(2585)BackGroundwith1(H2)1/4x2”HexBolt(withlockwasher,at
washerandt-nut)inthetophole.(g.35.1and35.2)
B:Makesure(1450)SLSupportand(2585)BackGroundaresquarethenattachwith1(S15)#8x1-3/4”Wood
Screw.(g.35.2)
C: InsertTNR2PostMounton(1450)SLSupportandattachwith2(PB2)1/4x1-1/4”PanBolts(withlock
washerandt-nut).Keep these bolts loose.(g.35.2)
D:Place(2428)SLBlockushtotopof(0968)MiddleTopandtighttotheLagScrewheadthenattachto(1400)
Postwith2(S4)#8x3”WoodScrewsfromoutsidetheassemblyandto(0968)MiddleTopfrominsidethe
assemblywith2(S2)#8x1-1/2”WoodScrews.(g.35.2)
1 x 1/4 x 2” Hex Bolt (1/4” lock washer, 1/4” at washer, 1/4” t-nut)
2 x 1/4 x 1-1/4” Pan Bolt (1/4” lock washer & 1/4” t-nut)
1 x #8 x 1-3/4” Wood Screw
2 x #8 x 3” Wood Screw
2 x #8 x 1-1/2” Wood Screw
S15
S15
1/4”Flat
Washer
1/4”Lock
Washer
1/4”
T-Nut
H2
H2
2428
PB2
Other Parts
1 x TNR2 Post Mount
1/4”T-Nut
1/4”Lock
Washer
PB2
S2
S4
S4
S2