Installation Guide

 71  [e-mail]
D:Attach1(1442)CrowsnestBottomSidetighttotopof(0840)CEGapBoardandushtotheinsideedgeof
each(2594)SLPostSupportusing3(S3)#8x2-1/2”WoodScrewsperside.Noticepilotholestowardsbottom
ofboards.(g.32.4and32.5)
E:Attach1(1443)CrowsnestSidetoeach(2594)SLPostSupportusing1(H13)1/4x3-1/2”HexBolt(withlock
washer,atwasherandpreviouslyinstalledt-nut)perside.(g.32.4and32.5)
Step 32: Crowsnest Assembly
Part 3
Hardware
2 x Crowsnest Bottom Side 5/4 x 6 x 18”
2 x Crowsnest Side 5/4 x 3 x 18”
1442
Wood Parts
6 x #8 x 2-1/2” Wood Screw
2 x 1/4 x 3-1/2” Hex Bolt
(1/4” lock washer, 1/4” at washer)
1443
H13
1/4”Flat
Washer
1/4”T-Nut
(previously
installed)
1/4”Lock
Washer
H13
Fig. 32.4
Fig. 32.5
1442
1443
2594
Flush
0840
Tight
Slide Wall
S3
S3