Installation Guide

 62  [e-mail]
HardwareWood Parts
Fig. 26.7
Fig. 26.6
2591
2591
2584
2491
Fig. 26.8
Step 26: Bench Assembly
Part 3
F:Attach2CornerBracketsto(2584)FrontGroundand(2591)BenchSupportusing2(S5)#8x1/2”Pan
Screwsperbracket.CornerBracketontheinsidetobeushtothetopof(2591)BenchSupportandCorner
Bracketontheoutsidetobeushtothebottomof(2584)FrontGround.(g.26.6and26.7)
G:Attach(2591)BenchSupportto(2484)BenchLegwith1(S15)#8x1-3/4”WoodScrew.(g.26.6)
H:Drive1(0318)GroundStake10-1/2”intothegroundtightto(2491)Diagonalandattachusing2(S3)#8x
2-1/2”WoodScrews.(g.26.8)
1 x Ground Stake 1-1/4 x 1-1/2 x 14”
0318
WARNING: To prevent tipping
and avoid potential injury, stakes must
be driven 10-1/2” into ground. Digging
or driving stakes can be dangerous if
you do not check rst for underground
wiring, cables or gas lines.
10-1/2”Into
Ground
0318
S3
6 x #8 x 1/2” Pan Screw
2 x #8 x 2-1/2” Wood Screw
1 x #8 x 1-3/4” Wood Screw
S3
Flush
2 x Corner Bracket
Other Parts
Corner
Bracket
Flush
Corner
Bracket
2584
S5
S5
S5
S15
S15
2484