Installation Guide

 61  [e-mail]
Note: Pre-drill all holes using a 1/8” drill bit before installing the Screws.
D: Attach1(2578)SeatEndto(2491)Diagonalwith1(H10)1/4x2-1/4”HexBolt(withlockwasher,atwasher
andt-nut).Makesureitislevelthenattachwith1(S15)#8x1-3/4”WoodScrew.(g.26.3and26.4)
E: Withahelper,usingthepilotholesasaguide,placeBenchTopassemblyfromStepAoneach(2578)Seat
End,bevelledendstobefacingout,thenattachwith4(S15)#8x1-3/4”WoodScrewsper(2592)BenchTop.
(2591)BenchSupporttobetightagainst(2584)FrontGround.(g.26.5)
Hardware
Fig. 26.3
9 x #8 x 1-3/4” Wood Screw
1 x 1/4 x 2-1/4” Hex Bolt
(1/4” lock washer, 1/4” at washer, 1/4” t-nut)
1/4”Flat
Washer
1/4”Lock
Washer
1/4”
T-Nut
H10
2578
2578
2592
2491
S15
S15
H10
Wood Parts
1 x Seat End 5/4 x 6 x 6-1/2”
2578
2591
Step 26: Bench Assembly
Part 2
Bevelled
Ends
Fig. 26.4
Fig. 26.5
2578
2584
S15
x4per
board
Usethishole