Installation Guide

 60  [e-mail]
Step 26: Bench Assembly
Part 1
Note: Pre-drill all holes using a 1/8” drill bit before installing the Screws.
A:
Place(0398)BenchBraceTopcentredunder2(2592)BenchTopsandattachwith4(S15)#8x1-3/4”
WoodScrews,asshowning.26.1.
B: Flushtothetopof(2484)BenchLegplace(2578)SeatEnd,angledcornerfacingdown.Attachwith1
(H10)1/4x2-1/4”HexBolt(withlockwasher,atwasherandt-nut).Makesurethetopof(2578)SeatEndis
levelthenattachwith2(S15)#8x1-3/4”WoodScrewsasshowning.26.2.
C: Flushtotheoutsideedgeof(2484)BenchLegattach(2591)BenchSupportwith1(H10)1/4x2-1/4”Hex
Bolt(withlockwasher,atwasherandt-nut)asshowning.26.2.
HardwareWood Parts
Fig. 26.1
2 x Bench Top 5/4 x 4 x 32”
1 x Bench Brace Top 5/4 x 4 x 6-1/2”
1 x Seat End 5/4 x 6 x 6-1/2”
1 x Bench Leg 2 x 4 x 13-1/2”
1 x Bench Support 5/4 x 4 x 14-5/32”
2578
2484
2591
2578
2484
0398
Flush
S15
Bevelled
Ends
Flush
Flush
2 x 1/4 x 2-1/4” Hex Bolt (1/4” lock washer, 1/4” at washer, 1/4” t-nut)
6 x #8 x 1-3/4” Wood Screw
1/4”
T-Nut
1/4”Flat
Washer
1/4”Lock
Washer
S15
S15
2592
0398
2591
2592
Fig. 26.2
H10
H10
H10