Installation Guide

 54  [e-mail]
Wood Parts
Hardware
12 x #8 x 7/8” Truss Screw
2 x 1/4 x 1-1/2” Lag Screw
(1/4” at washer)
6 x Siding 3/8 x 3-1/2 x 41-1/2”
1 x Middle Top 1 x 4 x 41-1/2”
1930
S0
1400
1406
Slide Wall
Tight
0968
Fig. 23.1
0968
Tight
S0
x2per
board
Step 23: Lower Slide Wall Assembly
Part 1
Note: Pre-drill all holes using a 1/8” drill bit before installing the Lag Screws.
A:
Tighttothetopof(1406)GroundSLSideandushtotheoutsideedgesofboth(1400)PostsontheSlide
Wallsideattach6(1930)Sidingtoeachpostwith2(S0)#8x7/8”TrussScrewsperboard,asshowning.
23.1and23.2.Makesuretherearenogapsbetweenboards.
B: Tighttothetop(1930)Sidingandushtooutsideedgesofboth(1400)Postsattach(0968)MiddleTopto
eachpostwith2(LS1)1/4x1-1/2”LagScrews.(g.23.1and23.2)
LS1
LS1
Fig. 23.2
1/4”Flat
Washer
1400
LS1
1930