Installation Guide

 53  [e-mail]
A:Drive2(0318)GroundStakes10-1/2”intothegroundtightto2(1400)Postsasshowning.22.1.Attach
using2(S3)#8x2-1/2”WoodScrewspergroundstake.(g.22.2)
Wood Parts
Hardware
Fig. 22.1
4 x #8 x 2-1/2” Wood Screw2 x Ground Stake 1-1/4 x 1-1/2 x 14”
0318
S3
Step 22: Attach Ground Stakes
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND.
WARNING: To prevent tipping and avoid potential injury, stakes must
be driven 10-1/2” into ground. Digging or driving stakes can be dangerous
if you do not check rst for underground wiring, cables or gas lines.
1400
10-1/2”IntoGround
Fig. 22.2
1400
0318
S3