Installation Guide

 36  [e-mail]
4 x 1/4 x 2-3/4” Hex Bolt
(1/4” lock washer, 1/4” at washer, 1/4” t-nut)
8 x 1/4 x 3-1/2” Hex Bolt
(1/4” lock washer, 1/4” at washer, 1/4” t-nut)
2 x Floor Front Back 2 x 4 x 45-1/4”
1 x Front Ground 1 x 5 x 45-1/2”
1 x Back Ground 1 x 5 x 77”
Wood Parts Hardware
2586
2585
2584
H13
Fig. 12.1
1/4”lock
washer
x4
1/4”
t-nut
1/4”at
washer
H11
2586
2585
2586
2584
Step 12: Front and Back Frame Assembly
Keep all bolts in this step loose until a later step.
A:Attach1(2586)FloorFrontBacktotheinsideofeachPostAssemblyonboththeSwingWallandSlideWall
Sidesusing1(H11)1/4x2-3/4”HexBolt(withlockwasher,atwasherandt-nut)percorner.Boltsareinstalled
fromtheinsideofthefort.Noticethattheholeson(2586)FloorFrontBackaretowardsthebottomofthe
boards.(g.12.1)
B:OntheFrontWallattach(2584)FrontGroundtotheoutsideofeachPostAssemblyusing4(H13)1/4x
3-1/2”HexBolts(withlockwasher,atwasherandt-nut).(g.12.1)
C:OntheBackWallattach(2585)BackGroundtotheoutsideofeachPostAssemblyusing4(H13)1/4x
3-1/2”HexBolts(withlockwasher,atwasherandt-nut).(g.12.1)
H11
H13
H13
x4
Slide Wall
Swing Wall
Front Wall
Back Wall