Installation Guide
33 support@cedarsummitplay.com
Step 10: Swing Wall Assembly
Part 1
A:Attach(2598)GroundSWSideto2PostAssemblieswith2(H4)1/4x4”HexBolts(withlockwasher,at
washerandt-nut)asshowning.10.1.Noticehowtheboardisplaced. Keep the bolts loose.
B:
Attach(0437)SWFloortoeach(1400)Post,inthebottomholes,with2(H8)1/4x4-1/4”HexBolts(with
lockwasher,atwasherandt-nut)and(0436)SWTopusing4(H8)1/4x4-1/4”HexBolts(withlockwasher,at
washerandt-nut).(g.10.1)Keep the bolts loose.
C:
Attach(2025)WallMountto(0437)SWFloorand(0436)SWTopusing2(G5)5/16x4-1/2”HexBolts(with
lockwasher,atwasherandt-nut).(g.10.1)Keep the bolts loose.
1 x Ground SW Side 1 x 5 x 85-61/64”
1 x SW Top 5/4 x 6 x 41-1/2”
1 x SW Floor 5/4 x 6 x 41-1/2”
1 x Wall Mount 2 x 4 x 38”
2598
0436
0437
Hardware
Wood Parts
2 x 1/4 x 4” Hex Bolt
(1/4” lock washer, 1/4” at washer, 1/4” t-nut)
6 x 1/4 x 4-1/4” Hex Bolt
(1/4” lock washer, 1/4” at washer, 1/4” t-nut)
2 x 5/16 x 4-1/2” Hex Bolt
(5/16” lock washer, 5/16” at washer, 5/16” t-nut)
H4
H8
Noticehole
positioning
Noticeholesare
attopofboard
Top
2025
G5
G5
H8
H8
H8
H4
Fig. 10.1
1/4”Flat
Washer
1/4”Lock
Washer
1/4”
T-Nut
1400
2598
0436
2025
1400
0437
5/16”Flat
Washer
5/16”Lock
Washer
5/16”
T-Nut
Approx
24”