Installation Guide

 19  [e-mail]
1 x Left Access Rail 2 x 4 x 62-7/8”
1 x Right Rail 2 x 4 x 62-7/8”
4 x Ladder Tread 5/4 x 4 x 13-3/4”
8517
2251
2600
Fig. 2.1
Wood Parts Hardware
Step 2: Access Ladder / Rockwall Assembly
Part 1
A:Place(2600)LeftAccessRailonlefthandsideof4(8517)LadderTreadsand(2251)RightRailonrighthand
sidewiththegroovesfacingin.(g.2.1)
B:Fiteach(8517)LadderTreadintogroovesonboth(2600)LeftAccessRailand(2251)RightRail,makesure
thetopedgeofthetreadsareushtothefrontoftherails.(g.2.1and2.2)
C:Pre-drillpilotholeswitha1/8”drillbitandattachrailsandtreadstogetherusing4(S3)#8x2-1/2”Wood
Screwspertread.(g.2.1)
Other Parts
2 x Swing Bracket
16 x #8 x 2-1/2” Wood Screw
2 x 5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 5/16” at washer, 5/16” t-nut)
G1
S3
Fig. 2.2
Fig. 2.3
2600
2251
8517
Swing
Bracket
End View
G1
5/16”Flat
Washer
5/16”T-Nut
Flush to
edges
D: AttachSwingBracketstotheinsidetopof(2600)
LeftAccessRailand(2251)RightRailatanglededge
using1(G1)5/16x1-1/2”HexBolt(withlockwasher,
atwasherandt-nut)perbracket.EdgeofSwing
Bracketisushwithedgeofrails.(g.2.1and2.3)
Left Side
Right Side
Top of Ladder View
S3
S3
8517
5/16”Lock
Washer