Instruction Manual

BREEZECARE 2600 LIGHT SMART
2322
The appliance is not intended to be used by children under the
age of 8. It can be used by children over the age of 8, as long
as they are given continuous supervision.
This appliance can be used by children aged 8 and above, and
persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, as long as they have
been given supervision or instruction concerning the use
of the appliance in a safe way and understand the hazards
involved. Do not allow children to play with the appliance.
Supervise children, they shall not play with the
appliance. Close supervision is necessary when the appliance
is being used by or near children.
ENGLISH
1. PARTS AND COMPONENTS
Img. 1. (Page 27)
1. Cover
2. Display and control panel
Fig. 2 (Page 28).
1. Display
2. On/off
3. Mist fan
4. LED light
5. Timer
2. BEFORE USE
Take the product out of the box.
Remove all packaging material and save the original box.
Make sure all parts and components are included and in good conditions. If any visible signs
of damage are observed, contact the Technical Support Service immediately.
3. OPERATION
Note: The ideal relative humidity level for human comfort is between 45 % and 65 %. Excess
humidity shows up in the form of condensation on cold surfaces or cold walls in the room. To
measure the room’s humidity correctly, use a hygrometer.
Relative humidity in different environments suitable for people:
Bedroom, living room: 45-65 % RH
Patient’s room: 40-55 % RH
Room with computer, experiment equipment: 45-60 % RH
Room with piano: 40-60 % RH
Museum, exhibition hall, and library: 40-50 % RH
Place the device on a flat surface.
Remove the cover and fill in the water tank. Do not exceed the maximum level mark on the
tank. Replace the cover.
Press the On/off button on the control panel to turn the device on. The display will show the
room temperature in ºC and the current relative air humidity in %.
Press the mist button to select the desired mist power level.