R VIDEO 4 POWER INPUT R A UDIO 4 L L R L R L VIDEO 3 L R VIDEO AUDIO 3 STATION 3 L R VIDEO STATION 2 AUDIO A/ V SOURCE INPUT VIDEO 2 AUDIO R A/V SELECT OUTPUT L R VIDEO STATION 1 AUDIO AUDIO 2 VIDEO L STATION 4 VIDEO 1 AUDIO L AUDIO R MASTER STATION AUDIO SELECT OUTPUT R VIDEO AU DIO 1 SIGNAL DISTRIBUTION BOX MODEL : SDB STATION 5 L ® AUDIO SDB Signal Distribution Box CS Control Station 2 1 1 MAIN POWER VOLUME 3 IR 4 S ® Owner’s Manual
IMPORTANT NOTICE It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle.
Materials included in this package: 1. 2. 3. 4. 5. 6. 7.
SDB45 System Overview The SDB45 is a versatile audio/video switching system and has the capacity for four Audio/Video inputs and five Audio/ Video outputs along with a separate audio output for connecting an FM modulator to the vehicle radio. The SDB45 consists of a Signal Distribution Box (SDB) and two Control Stations (CS) along with cabling for two signal sources (SDBSC) and cabling (CSSC) for connecting two video screens.
proceed to mount each component. 9. When all components are mounted recheck the entire system to be sure it is functioning correctly and ensure that no wiring was pinched or connected improperly during final installation. Use the supplied cable clamps on the control station interconnect. GENERAL INSTALLATION APPROACH: 1. Decide upon system configuration and options that will be installed (i.e.: what components, VCP, DVD, TV Tuner, Video Game, Monitors, etc.). 2.
Output Connector Layout of the SDB A/V SELECT OUTPUT STATIO N 5 L R VIDEO R VIDEO STATIO N 2 AUDIO AUDIO L AUDIO SELECT OUTPUT STATIO N 3 STATIO N 4 AUDIO L VIDEO R STATIO N 1 AUDIO L R AUDIO VIDEO L MASTER STATIO N AUDIO R VIDEO L R 1 MONITOR 5 DC 12V MONITOR 4 DC 12V MONITOR 2 DC 12V MONITOR 3 DC 12V FM MODULATOR DC 12V MONITOR 1 DC 12V 2 STATION 5 CONTROLLER STATION 4 CONTROLLER STATION 3 CONTROLLER STATION 2 CONTROLLER 4 1.
5. Video Output This jack accepts the yellow RCA plug and applies the video signal to the user monitor; (Example LCM4000, LCM5600 etc.). Use the Control Station Source Cable (CSSC). 6. Monitor 1 (12VDC Output) This jack accepts the black barrel type power connector from the Control Station Source Cable. This supplies power to the user monitor. 7. Station 1 controller (8-pin DIN Jack) This 8-pin jack provides the interconnection from the SDB Audio Video Signal Distribution Box to the Control Station.
2. Video Input Jack This jack accepts the yellow RCA plug from the SDBSC cable and applies the video signal from the source component (Example VCP, DVD etc.). 3. Source Component 12 VDC Output This jack accepts the black barrel type power connector from the SDBSC cable. (This supplies power to the source component). 4. IR Repeater Output This jack accepts the 3.5mm mono plug of the SDBSC. (NOTE: The IR repeater in this system may not work with non-Audiovox components.) 5.
– Before attempting to operate the Remote Control, press and hold the source SELECT button (2) for 6 seconds until the source indicator LED (3) begins flashing. Once the indicator is blinking the Control Station will accept Infrared input command signals from an Infrared Remote Control device. To remove the Infrared Control function from the Control Station press and hold the button for 3 seconds.
6. Headset (3.5mm Headphone jacks) – These jacks provide connections for stereo headphones for private listening at each station. (Note: Plug the headphones in before putting the headphones on. Adjust the volume to a low level before putting the headphones on.) D. The master control station’s Main Power button has three functions: 1. Power On – Press and release once to turn the system on. 2. Power Off – Press and hold for three seconds to turn the entire system off. 3.
Specifications** Inputs Input Signal Level Audio: Video: Outputs 4 A/V inputs (RCA) Up to 3 V p-p (10,000 ohms) 1 V p-p (75 Ohms) 5 A/V outputs 1 Audio Output Output Signal Level Audio: Audio S/N ratio: Video: Video S/N ratio: Up to 3 V p-p (10,000 ohms) Greater than 60 dB 1 V p-p (75 Ohms) Greater than 55 dB DC Input (Battery): DC Input (Accessory): 10 – 16 VDC (Battery wire - 10 Amps Max) 10 – 16 VDC (Accessory wire – 1 Amp Max) 12 VDC Source Current Capability: Input Source 1 through 4: 2 Amp Max e
F o r C u s to m e r S e rvice V is it O u r W e b s ite A t WWW.audiovox.com P ro d u ct In fo rm a tio n , P h o to s , FA Q ’s O w n e r’s M a n u a ls © Copyright 2001 Audiovox Electronics Corp., 150 Marcus Blvd.