Operator`s manual

MT UL BL
8
figure 6
3 - Slide the outer spiral out (see figure 7) and then the inside
auger (see figure 8).
figure 7
figure 8
4 - Remove the bowl gasket from its seat (see figure 9).
figure 9
5 - Dismantle the faucet assembly (see figure 10).
figure 10
6 - Slide the drip tray out and empty it.
5. 3. 2 CLEANING
1 - Prepare at least two gallons of a mild cleaning solution of
warm (45-60 °C / 120-140 °F) potable water and
dishwashing detergent. Do not use abrasive detergent.
Important: if present, follow label directions, as too strong
a solution can cause parts damage, while too mild a
ATTENTION
Before any disassembly and/or cleaning procedure
make sure that the dispenser is disconnected from its
power source.
IMPORTANT
Do not attempt to wash any machine components in a
dishwasher.