Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-78
clamping ring, stainless steel basket with drain plug.
G. Centered behind the scraping bowl, provide a Back Splash Mount
Spring Type Pre-rinse Spray; 8" centers dual valve back splash
mount, flexible stainless steel hose wrapped with stainless
steel support spring with wall bracket to adjacent wall.
Complies with April 2007 ―LEEDS for Schools‖ Water Efficiency
(WE) Credit 4: Process Water Use Reduction - maximum water use
of 1.4 GPM. Fisher Model 13390*M112; 1.15 GPM consumption.
H. Sink supported on standard Open Frame Base with cantilevering
right and left end drain boards. Front and end crossrails below
sinks (no rear crossrail).
1. Stud bolted to the bottom of the staff right drain board,
provide 14 ga. S/S hat channels for mounting the hose reel
shown.
ITEM NO. D2 - COLLECTOR; FOOD WASTE
BY ALTERNATE
A. By alternate, provide Salvajor model P914 scrapping,
pre-flushing & collecting system; overall 36-1/2"L. X 23-1/2"D.
x 34"H. Tank and legs of stainless steel; removable,
lightweight tableware salvage basin designed to trap tableware
of all types; removable, lightweight perforated scrap basket
designed to retain fibrous waste; water recycling 3/4HP
centrifugal pump with corrosion resistant housing and impeller;
corrosion resistant pre-plumbed water control assembly
including pre-wired solenoid valve, automatic water blender,
back flow preventing check valves, unions, ½" shut-off valves;
model SS-33 motor controller in NEMA 4X watertight corrosion
resistant enclosure with magnetic contactor, 24 volt Safety
Circuitry, line disconnect, start-stop push buttons, run light.
1.
Install as shown on the plan.
Inferred by change order to add pre-rinse at tray return area
collector;
Add paragraph C. as follows;
C. Centered behind the Food Waste Collector basin, punch the back