Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-63
side) back to upper bars at 60" O.C. max. and fully welded to
Component Hardware Group Inc., model A24-0206*M112, set screw
type 1-7/8", S/S tubular shelf supports for 1-5/8" O.D. tubing.
1. Rack supported atop the elevated shelf and between S/S, 1-5/8"
O.D. - 16GA. tubing supports. Supports aligning and integral
with elevated shelf supports. Provide elevated shelf with
die-stamped S/S ferrules where tubing supports penetrate.
B. Provide Utensil Rack with 2 - 2 prong hooks per foot of total
bar lengths. Double Prong Hooks are Component Hardware Group
J77-4401 stainless steel double prong sliding pot rack hooks.
ITEM NO. B18 - TABLE; COOKS W/ SINK-DRWS
REQUIRED
A. Provide overall 2'-6"W. x 144"L. x 36" high to top of ―V‖ edge.
Construct top in accordance with standard specifications for
Metal Tops.
1. Provide exposed edges of top with 3/4"H. inverted ―V‖ edge,
turning straight down for 1-1/2", with ½" toe-in on 30
o
angle
per standards for Metal Top.
2. Provide a curb at the abacking table. Provide with 1-1/2"
turn-up or 2" turn-up with 2" turn back and 1" turn down to
form Curb Backsplash as specified per standards for Metal Tops
and as detailed.
B. Work Sink; At staff left end, as shown, provide standard Metal
Top integral sink. Work Sink; 20"W. x 20"D. x 8"H. Provide with
the following;
1. Deck Mount Faucet; provide a ½" Single Hole Deck Mount Faucet;
½" double valve faucet with 10" or 12" swing spout, chrome
finish;
a. Fisher Mfg. Co. 3112*M112 or 3113*M112.
b. T&S Brass model B-0200-LN 061X*M112 swivel nozzle or
B-0201*M112
2. Provide sink bowl with 2" rough chrome rotary action lever
drain having stainless steel bar and flat stainless steel
strainer plate. Provide with 6" tail piece.