Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-62
components; knife motor shuts off after 30 seconds without
carriage motion; double action indexing barrel cam; gauge plate
interlock prevents tilt or removable of product tray when knife
is exposed; gas piston lift assist cleaning leg; power loss
interlock requires slicer restart; ergonomic handle; 1/2HP
permanently lubricated ball bearing knife drive motor;
one-piece anodized aluminum base; 10 rib Poly V-Belt Drive
System; S/S product tray - gauge plate & top knife cover; swing
away thermoplastic meat grip; product deflector; sealed push
button switches protected by moisture protected membranes; 6'
cord set; capacity for 12" x 6" rectangular or 8" diameter
product. Linear drive semi-automatic carriage movement using
magnets and electricity; Three semi-automatic carriage speeds;
custom stroke lengths set by user; manual mode assist. Provide
with the following options;
1. Knife removal tool total encloses knife edges and allows
cleaning in ware washer or sink.
ITEM NO. B16 - STAND; MOBILE SLICER
REQUIRED
A. Provide Bevles Company, Inc model RA35-ES16-FL4 slicer/mixer
stand, overall 20-1/2" x 26" x 35"H. Aluminum construction with
reinforced S/S top having marine edge; welded 1-1/2" tube top
frame, base corners, 1-1/2" x 1-1/2" extruded angle uprights;
riveted extruded side panels support 18 x 26 pans at 1-1/2" on
center; solid aluminum bottom; bolted 5" HD plate casters.
Provide with the following options;
1. (4) floor locks
ITEM NO. B17 - UTENSIL RACK; SHARED 3 BAR W/ SHELF
REQUIRED
A. Provide 3-Bar Shared Utensil Rack equally overhanging the
abacking tables as shown. 72‖L. x 22‖W. x 7'6‖H. rack comprised
of a rectangular bar upper rack with lower single bar. Bars are
2" x 1/4" stainless steel. Upper horizontal bar with 4" radiused
corners, bar fully welded to Component Hardware Group Inc.,
model A24-0207*M112, set screw type 5-1/4", S/S tubular shelf
supports for 1-5/8" O.D. tubing. Lower single horizontal bar,
at 12" below upper rectangular bar, diagonally braced (on each