Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-46
installed whether or not each item is specifically mentioned in
the specifications.
ITEM NO. A11A - PAN RACK; UNIVERSAL ROLL-IN
REQUIRED
A. Provide Cres-Cor Model No. 207-UA-12AC*M112, roll-In
refrigerator/hot cabinet racks, overall 24-1/2"W. x 25-1/8"D.
x 64-1/2"H. Extruded aluminum welded construction, Twelve (12)
universal angle racks for 12" x 20" and 18" x 26" pans of which
10 sets are removable (2 are not) adjustable on 1-1/2" centers,
heavy duty 250 5" diameter swivel casters. Provide with 250
o
Macerated casters for use in hot or cold cabinets.
1. Provide each rack with (2) floor locks.
ITEM NO. A11B - CABINET; MOBILE TALL ENCLOSED
REQUIRED
A. Provide Food Warming Equipment Company, Inc. model
ETC-UA-19-INS*M112 mobile enclosed transport cabinet; overall
25.5"W. x 31"D. x 69.25"H. 304 S/S construction with 20 gauge
exterior and 24 gauge interior with coved corners; welded tube
base frame with 10 gauge steel reinforcing plates at all corners
and fittings; ―Ultra Guard‖ UG-26 insulation at top, sides,
back, bottom, door; recessed hand grips on each side; flush mount
stainless doors with cabinet mounted high temp. gasket; (2)
heavy duty edge mount door hinges and edge mount full grip
positively closing latch; polyurethane casters with Zerk
grease fittings - two rigid and two swivel with brake; universal
pan bottom support chrome coated welded rod-style tray slides;
tray slides are fully adjustable / removable from lift-off
stainless steel uprights punched on 1-1/2" centers. Provide
with the following options;
1. (19) pair of tray slides on 3" centers.
2. Full perimeter bumper.
A. Provide Food Warming Equipment Company, Inc. model
ETC-UA-19-INS*M112 mobile enclosed transport cabinet; overall
25.5"W. x 31"D. x 69.25"H. 304 S/S construction with 20 gauge
exterior and 24 gauge interior with coved corners; welded tube
base frame with 10 gauge steel reinforcing plates at all corners