Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-43
required parts and refrigeration specialties for complete first
class installation. Refrigerant shall be in compliance with
the Montreal Protocol for reduced CFC content; refrigerator
using R-404A. Install compressors, refrigerant piping and
refrigerant as specified, hereinafter. See Refrigeration
Requirements sub section of this specification section.
Equivalent manufacturers must provide equipment of similar
dimensional size, and comparable construction and same or
higher BTU refrigeration capacities with similar utility
requirements to the refrigeration system on which this
specification is based. Use of equivalent manufacturers
equipment shall not require major changes to the plan, the
equipments location or to electrical service designated within
the contract documents. Any minor changes required are the
responsibility of the provider to coordinate with other trades
and all costs associated with changes shall be covered by the
provider. Listed Equivalent manufacturers are responsible for
verifying they comply with these requirements before submitting
a bid.
l. Provide pre-fitted remote refrigeration system for remote
installation as located on drawings, including all standard
parts, refrigeration specialties, factory sized
refrigeration lines, air cooled condensing unit, with
weather-proof cover and low ambient kit/winter controls using
head pressure control valve and other items necessary for a
complete and properly operating system. Hang evaporator
with double nutted nylon bolts. Provide (5) year compressor
warranty.
2. Provide Refrigerator Item No. A7 with Kolpak Industries Model
PR-154-M, 10775 BTU/Hr. pre-fitted R-404A remote
semi-hermetic refrigeration system with 1.5 horsepower
condensing unit and matched evaporator coil for refrigerator
to operate at 35
o
F. Alternate manufacturers include, Penn,
Norlake, Master-Bilt.
3. Weather proof covers shall include hail screens.
4. Evaporator fan motor of under 1 horsepower and using less that
460 volts shall have electronically commutated motors
(brushless direct current motors); or 3-phase motors.
5. Condenser fan motors of under 1 horsepower shall use
electronically commutated motors, permanent split
capacitor-type motors or 3-phase motors.