Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-31
bottom shelf 6" AFF and top shelf 48" AFF. Units comprised of
the following;
1. A1A - 5 Units comprised of 2448HD shelves, 24"D. x 48"L.
2. A1B - 2 units comprised of 2436HD shelves, 24"D. x 36"L.
3. A1C - 1 unit comprised of 2460HD shelves, 24"D. x 60"L.
ITEM NO. A2 - SHELVING; CHROME WIRE
REQUIRED
A. Provide, assemble and set in place, the following stationary
storage system shelving, as manufactured by AMCO Corporation or
equivalent by Intermetro (Metro) Industries Corp.,
International Storage Systems (ISS) *M112. Shelving design and
model numbers are based on AMCO, AMCO II wire shelving, chrome
finish, 72" high posts, each unit 4 shelves high, with all
standard parts and accessories necessary for a complete
installation. Provide "S" clips at perpendicular setting units
to avoid interior corner posts. Install with shelves at 6" -
28" - 50" - 72" AFF.
1. A2A - Three (3) units comprised of A2448C shelves, 24"W. x
48"L.
2. A2B - One (1) units comprised of A2436C shelves, 24"W. x 36"L.
3. A2C - Six (6) units comprised of A2442C shelves, 24"W. x 42"L.
B. Provide Eight (8) TSM8GR Tray Slide Modules. 22-1/4" W x 19"
L x 14" H; one piece design with 8 slides for 18" x 26" sheet
pans; complete with nylon ties to attach to all types of wire
shelves, gray epoxy. Owner to designate installation
locations.
ITEM NO. A3 - CAN RACK; TALL / MOBILE
TWO (2) REQUIRED - TWO (2) BY ALTERNATE
A. Provide New Age model 1250ck*M112, all welded aluminum can rack
with casters, overall 25"W. X 35"D. X 77-1/4"H. Capacity for
(162) - #10 or (216) - #5 cans. 1.25" x 1.5" x .070" extruded
aluminum tubing uprights with 1"sq. X .070" aluminum tubing
crossbraces; 1.25"Leg x .100" thick angle and ―T‖ section can
guides with 3/4" upturned front and rear edges to stop cans; can
guides slope 1" front to back; (4) - 5" platform casters, (2)