Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-29
4) Cabinetry Hardware; Hardware shall comply with
American National Standard for Cabinet Hardware, ANSI
A 156.9, Type 2 (institutional).
5) Hinged Doors Locks; Provide Kason 7600 series or
equivalent utility locks; die-cast zinc; chrome finish;
3/4" cylinder rotating cam type utility lock; key
removable in locked and unlocked position; (2) brass
keys per lock. Key all cylinder locks within each room
alike.
6) Hinges; steel heavy-duty, 5-knuckle, semi-concealed
institutional type 2-1/2", with 6-screw attachment,
tight pin, hospital tip.
7) Door Catches; 6lb. pull magnetic catches, 1 per door less
than 42"H, 2 per door over.
8) Pulls; 5/16"Dia. extruded aluminum wire projecting
type, brushed chrome, 4"centers mounting.
b. Cabinet Construction;
1) Provide Metal Tops over cabinetry with hat channel
reinforcement to allow securing of cabinetry below.
2) Cabinet construction and materials shall comply with the
provisions of the Architectural Woodwork Institute
(AWI) "Quality Standards", section 400, premium grade,
reveal or full overlay construction.
3) Cabinetry full enclosed back, sides and front (as
specified).
4) All cabinet hardware /cabinet construction methods, and
plastic laminate colors shall be submitted for approval
and selection.
5) All exposed surfaces, ends, backs and door fronts shall
receive high pressure plastic laminate.
6) Exposed edges of all plastic laminate covered panels,
bottoms, doors, etc. shall be Edge Banded; door, panel
corners radiused 12 mm with (1) continuous length of edge
banding wrapping the entire panel with joint on the
bottom edge.
2.3 List of Equipment
A. Following is a detailed list of all equipment in the new food
service area to be a part of this contract or provided by the
owner. All electrical equipment is 60 cycle. All items