Specifications

ACI/Frangkiser Hutchens Architects 4-07058
Liberty "North" Second High School
Liberty Public School District #53
Building Construction Bid Set
FOOD SERVICE EQUIPMENT 11400-20
d. When sinks are specified integral to the Dish Table Top,
construct sink of 14 gauge with all bowl vertical and
horizontal corners coved on 1" R. No solder or caulked
fillets allowed. Sink bowl bottom creased/sloped to
drain/disposal opening, to provide complete drainage of
sink. At drain valve location, sink bottom ferruled
downward to allow installed drain valve grate to set flush
to or below plane of sink bottom. 14 ga. S/S ―L‖ bracket
stud bolted to bottom of sink bowl to support drain twist
action handle. Punch splash top, deck or splash face for
trim as specified. Faucets/pre-rinse sprays centered
over sink compartment. Sound deaden bottom of sink.
Integral sinks shall be continuously welded into the metal
top, ground smooth and polished. Backsplash, Metal Top
and base as specified for the specific item.
9. Open Frame Base:
a. Materials;
1) Legs / crossrails ; shall be Stainless Steel.
2) Leg Gussets; Component Hardware model A18-0206, or
approved equal, 300 series x 16 ga.; set-screw style;
3-1/2"H. die-stamped round fully enclosed straight
body.
2) Bullet Feet; Components Hardware model A10-0851, or
approved equal, 1-1/4" adjustable Stainless Steel clad
hex bullet feet.
3) Flanged Feet; Component Hardware model A10-0854
Stainless Steel 1-1/8" adjustable flanged feet with
mounting holes, set in sealant and expansion anchored
to the floor.
4) Casters; Shall be 5" diameter swivel, having 200 lbs.
per caster load capacity unless otherwise specified.
Shall be Jarvis and Jarvis Series No. 305 for plate type
of Series No. 365 for stem type, or approved equal.
Wheels shall be cadmium plated steel disc with annular
ball bearings in hubs and neoprene rubber tires. When
specified provide casters with side brakes. Install
casters having brakes on exposed longest side of tables
or stands.
b. Provide 1-5/8" x 16 ga. crossrails at rear and ends unless