Specifications

ManualsBrandsCecilware ManualsWater DispenserGB2P

CAPPUCCINO, COFFEE, and SOUP DISPENSERS

GB POUROVER models:

•GB1P

•GB2P

•GB3P

•GB4P

OPERATION MANUAL

• Specifications...................................................…. 2

• Installation and Operating Instructions.............. 4

• Adjustments..........................................…............. 6

• Care and Maintenance.........................….............. 8

• Components Illustration.....…............................. 11

• Parts Identification...................…........................ 15

• Wiring Diagrams..........................…..................... 21

Cecilware sells value... Worldwide

45-05 20th Avenue, Long Island City, NY 11105 • 718-932-1414

FAX 718-932-7860

NH79A 11/99

Summary of content (15 pages)

PAGE 1
CAPPUCCINO, COFFEE, and SOUP DISPENSERS GB POUROVER models: •GB1P •GB2P •GB3P •GB4P OPERATION MANUAL • Specifications...................................................…. 2 • Installation and Operating Instructions.............. 4 • Adjustments..........................................…............. 6 • Care and Maintenance.........................….............. 8 • Components Illustration.....…............................. 11 • Parts Identification...................…........................
PAGE 2
Electrical Specifications Model No. Volts Phase Hz Watts GB1P, GB2P, GB3P 120V 1 60 1.8KW Number of Heaters 1 GB1P, GB2P, GB3P, GB4P 120/240V 240 1 1 50/60 50/60 3.0KW 3.0KW 1 1 15 Receptacle Nema No. 5-15R Circuit Breaker 15A 15 15 L14-20R** L6-20R 20A 20A Amps 120V, 1.8 KW, 15A, Nema 5-15R standard on ail models; 3.0 KW, 120/240V units available ** 120/240V, 3 pole, 4 wire grounding type Twist-Plug Receptacle. For 240V units. Use L6-20R, 2 pole, 3 Wire Twist-Plug Receptacle.
PAGE 3
START UP INSTRUCTIONS FOR GB POUROVER CAPPUCCINO DISPENSER (see illustration 9-3 for clarification) I. INSTALLATION INSTRUCTIONS This equipment is to be installed to comply with the applicable Federal, State, or local plumbing codes having jurisdiction. In addition: 1. A quick disconnect water connection or enough extra coiled tubing (at least 2x the depth of the unit) so that the machine can be moved for cleaning underneath. 2.
PAGE 4
III. PRIMING - AUTOFILL - Water Selection Switch - Toggle Down (See Back Panel) 1. Plug into power outlet. 2. Turn Heater Switch ON. 3. Allow 10 to 15 minutes for water to reach dispense temperature of 185°F. Heater Indicator Light (red) goes ON when heater is on (see lower front panel). 4. Fill hopper with product. 5. Place cup under dispenser. 6. Push and hold Dispense Button (green) until water flow s from mixing chamber 7. Machine is primed and ready to go. IV.
PAGE 5
DRINK STRENGTH ADJUSTMENT - Adjusting the AUGER SPEED or the WATER FLOW RATE ON DISPENSE VALVE. I. UNITS WITH FIXED SPEED AUGER MOTORS-AC [CD150] • Fixed Auger Speed [95 RPM] and dispenses powder at a constant fixed rate. Drink Strength adjustments can be made by adjusting the water flow rate on the Water Dispense Valves. [See ILL. C] 1. Remove Hoppers to access the Dispense Valve, located behind the hoppers. 2. Locate Flow Adjustment Screw on Dispense Valve. (See illustration C) 3.
PAGE 6
GB3P (POUROVER) PARTS IDENTIFICATION
PAGE 7
DESCRIPTION AND LOCATION OF COMPONENTS GB3P (POUROVER)
PAGE 8
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 DESCRIPTION WATER BOTTLE 3 gal / OR 6 gal RESERVOIR ICOVER RESERVOIR ASSY SILICONE HOSE - RESERVOIR TO TANK SILICONE HOSE - BREATHER TUBE TO BREATHER TUBE SILICONE HOSE - HOSE BARB TO RESERVOIR HOSE BARB,REOUCER SILICONE HOSE - WATER INLET VALVE TO HOSE BARB TANK WELDMENT ASS'Y, (for 1 Heater) (HOT WATER) SWITCH, WATER SELECTION – POUROVER/AUTOFILL POWER/ ELECTRICAL CORO WATER LEVEL SENSOR (CCA) TERMINAL BLOCK 120V f OR 240V BRACKET, TERMINAL BRACKET BALLAST RELA
PAGE 9
PARTS IDENTIFICATION LIST GB3P (POUROVER) RESERVOIR AND TANK ASSEMBLY Q174Q RESERVOIR ASSEMBLY ITEM 1 DESCRIPTION P.O-LINE TANK(CB3M/ICAP) PART NO Q174A QTY 1 2 FLOAT SWITCH 70-V-A L499A 1 3 4 DIRECT MOUNTING SEAL (?0.466 ID) LEVEL CONTROL PROBE SEAL H46IA K402A 3 1 5 LEVEL CONTROL PROBE P410A 1 6 7 ELBOV ASS'Y. ½” OD S.S. 90 ELBOW K5ZSQ K525A | 1 8 UPPER TANK MOUNTING BRACKET R171C 1 RL40Q HOT WATER TANK ASSEMBLY ITEM 8 9 DESCRIPTION DIRECT MOUNTING SEAL (?0.466 ID) 1/4-20x5/8 S.
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15