Specifications

PICTURE/DURATRAN REPLACEMENT and BULB AW STARTER REPLACEMENT • ILL. D

TO REPLACE THE PICTURE

DURATRAN:

Lift up the two end tabs on top of door with a pointed object or flat head

screwdriver. Pull the entire picture frame out. Open up the two clear panels and

replace picture. Tuck clear plastic panel inside bracket at top.

BE SURE TO TUCK CLEAR PANEL UNDER BRACKET

BEFORE SLIDING FRAME ASS'Y INSIDE DOOR. THE

LONGER METAL TAB SIDE GOES IN THE FRONT.

To replace the Fluorescent Bulb:

Remove the inside door panel. Turn the

lamp and pull it out of the lamp holder,

then place the new lamp into the lamp

holder and turn it until it snaps into

position.

To replace the Starter:

Remove the inside door panel.

Turn the starter slightly counter-

clockwise and take it out of the starter

base.

To install the new starter, snap the

starter into the starter base and turn it

slightly clockwise into position