Specifications

Definition of Screens during Normal Operation:
CECILWARE
DISPENSER V #.##
PLEASE WAIT
LOW WATER LEVEL
PLEASE WAIT
LOW WATER TEMP
PLEASE RINSE
TO CONTINUE
PRESS AND RELEASE
TO RINSE
PLEASE SELECT
CHOICE OF DRINK
PRESS AND RELEASE TO
DISPENSE
PRESS AND HOLD
UNTIL 2/3 FULL
HOPPER #@
MUST BE RINSED
HOPPER #@
MUST BE RINSED
PLEASE WAIT
HIGH WATER TEMP
HOPPER # @
IS OFF
1. Initialization Screen
Definition -This screen is displayed only during the first few seconds after "power-
on". The only purpose of this screen is to display the System
Software Title (DISPENSER) and Version Number (V #.##).
2. Low Water Level Screen
Definition - This screen is displayed after the Initialization Screen during the initial tilling of the water tank (first fill).
Once the water in the reservoir
tank has reached the appropriate fill level this screen is retired.
3. Low Temperature Lockout Screen
Definition -
This screen is displayed when the Low Temperature Lockout feature is ON and the present water temperature is below the Low
Temperature Lockout trip point.
4. System Rinse Lockout Screen
Definition - T
his screen is displayed when the Rinse Lockout feature is ON and all Hoppers have met the conditions for Rinse Lockout. A Hopper
will enter Rinse Lockout when the respective Hopper has dispensed but has not been rinsed for a period of tim
e greater than that defined by the
Rinse Lockout Time. Since the system has no method of recording elapsed time during "power-
off", the system will place all Hoppers in Rinse
Lockout upon "power-on" as a sanitary precaution.
5. Rinse Screen
Definition - This screen appears when the Rinse Key is pressed while the system is waiting to dispense. If any of the Dis
pense Keys are pressed
while this screen is being displayed the system will rinse the Hopper corresponding to the depressed key. If the Rinse Key is
released while a
Hopper is being rinsed this screen will remain until the rinse process is complete.
6. Selection Screen
Definition - This screen is displayed along with a Dispense Screen while the system is waiting to dispense. This screen alternates with a
Dispense Screen every three seconds.
7. Portion Control Dispense Screen
Definition - T
his screen is displayed while the system is waiting to dispense if the Dispense Mode is set to Portion Control. This screen alternates
with the Selection Screen every three seconds.
8. Free Flow Dispense Screen
Definition - This screen is displayed while the system is waiting to dispense it the Dispense Mode is set to Free Flow. This screen alternates
with the Selection Screen every three seconds.
9. Rinse Warning Screen
Definition -
This screen appears when the Rinse Warning feature is ON and a Hopper (identified by @) has dispensed but has not been rinsed for
a period of time greater than that defined by (50 * Rinse Lockout Time) minutes.
For example: if the Rinse Lockout Time is 6 Hrs and the Rinse Warning feature is ON then the Rinse Warning will be trig
gered when a Hopper is
not rinsed for 300 minutes (5 hours). Triggering a Rinse Warning will cause the audible alarm to sound for two seconds and the Rinse War
ning
Screen to be displayed for five seconds. The system will then revert back to normal operation. If the offending Hopper is not rinsed after the first
Rinse waning additional Rinse Warnings will be triggered every five minutes until the respective Hopper is rinsed.
10. Rinse Lockout Screen
Definition - This screen appears when a Dispense Key is pressed corresponding to a Hopper (identified by @) that has en
tered Rinse Lockout. A
Hopper will enter Rinse Lockout when the respective Hopper has dispensed
but has not been rinsed for a period of time greater than that defined
by the Rinse Lockout Time. Once a Hopper enters Rinse Lockout the LED's of the Dispense Keys related to that Hopper will turn OFF thus
indicating that the Hopper will no longer dispense.
11. High Temperature Lockout Screen
Definition - This screen is displayed when the present water temperature is 10°F above the water temperature set point.
12. Hopper Status Warning Screen
Definition - This screen appears when a Dispense Key is pres
sed corresponding to a Hopper (identified by @) that has been turned OFF. Once a
Hopper has been turned OFF the LED's of the Dispense Keys related to that Hopper will turn OFF thus indicating that the Hopper will no longer
dispense.
13