Corp. ICED TEA MODULAR BREWER AND DISPENSER SYSTEM FTC-5, FTC-10

8
THERMOSTAT ADJUSTMENT
Two types of Thermostats are used on FTC Brewers:
Type A - Surface mounted thermostat with slotted adjustment stem. Should not be adjusted past 195º F.
Type B - Capillary bulb thermostat with adjustment knob. Should not be adjusted past 203º F.
If field adjustments are needed, INCREASE or DECREASE temperature by GRADUALLY rotating the adjustment stem or
knob CLOCKWISE OR COUNTER-CLOCKWISE.
Type B - Thermostats can be fine-tuned as follows:
• Make sure ADJUSTMENT KNOB is turned clockwise to its maximum position.
• Pull off ADJUSTMENT KNOB and locate small adjustment screw.
Turn 1/4 turn COUNTER-CLOCKWISE TO INCREASE temperature and CLOCKWISE TO DECREASE temperature.
• When GREEN BREW LIGHT comes on, take all temperature readings at the spray head with the spray head removed.
TYPE B – L532A
CAPILLARY– BULB THERMOSTAT
NEW UNITS 7/24/98
TYPE A - 59016
SURFACE MOUNT THERMOSTAT
OLDER UNITS