Corp. ICED TEA MODULAR BREWER AND DISPENSER SYSTEM FTC-5, FTC-10

INSTALLATION AND OPERATION INSTRUCTIONS

UNPACKING AND ASSEMBLY:

The machine is shipped with 1 funnel ass’y and a water inlet fitting.

ACCESSORIES USED WITH THE MACHINE:

Sanitary Style Iced Tea Dispenser.

WATER INLET CONNECTION:

The National Sanitation Foundation (NSF) requires the following for an NSF approved hook-up.

This equipment is to be installed to comply with the applicable federal, state, or local plumbing codes having jurisdiction.

In addition:

1. A quick disconnect water connection or enough extra coiled tubing (at least 2x the depth of the unit) so that the machine

can be moved for cleaning underneath.

2. An approved back flow prevention device, such as a double check valve to be installed between the machine and the wa-

ter supply.

The FTC-3, FTC-5, FTC-10 are equipped with 1/4 flare water inlet fitting, located in the back of the unit.

Connect the ¼" dia. Copper waterline to the ¼" flare water inlet fitting of the valve.

HIGHLY RECOMMENDED: A water shut-off valve and a water filter, preferably a combination charcoal/ phosphate filter, to

remove odors and inhibit lime and scale build up in the machine.

Note: In areas with extremely hard water, a water softener must be installed in order to prevent a malfunctioning of the

equipment and in order not to void the warranty.

FTC-3

FTC-5

FTC-10

WATER INLET VALVE # 80235