Specifications

11
ADJUST SECONDS ADJUST SECONDS
DAY HH:MM:##
Description – The Adjust Seconds function allows the user to adjust (set) the systems Real-Time-Clock Seconds
placeholder.
ADJUST MINUTES ADJUST MINUTES
DAY HH:##:SS
Description – The Adjust Minutes function allows the user to adjust (set) the systems Real-Time-Clock Minutes
placeholder.
ADJUST HOURS ADJUST HOURS
DAY ##:MM:SS
Description – The Adjust Hours function allows the user to adjust (set) the systems Real-Time-Clock Hours
placeholder.
ADJUST DAY ADJUST DAY
### HH:MM:SS
Description – The Adjust Day function allows the user to adjust (set) the systems Real-Time-Clock Day
placeholder.
CLOCK CALIBRATION CONSTANT CLOCK CAL CONST
##
Description – The Clock Calibration Constant function allows the user to calibrate the systems Real-Time-Clock
(RTC). Each unit corresponds to approximately five seconds per month. Thus, if the RTC is running five
seconds slow per month then the Clock Calibration Constant needs to be increased by one. Conversely, if the
RTC is running five seconds fast per month then the Clock Calibration Constant needs to be decreased by one.
UNITS UNITS
ENGLISH/METRIC
Description – The Units function allows the user to select English (oz, °F) or Metric (mL,°C) units of measure.
DEFAULT VALUES DEFAULT VALUES
ARE YOU SURE ?
Description – The Default Values function allows the user to set all system
parameters back to their Factory Default Settings. This provides a known
(reference) configuration for troubleshooting purposes.
DEFAULT VALUES
COMPLETED