Specifications

Z:\DRAWINGS\ND000\ND96A-A-LTB-MAN.dwg, 03/21/2002 04:34:40 PM, 1:8.01226
SIDE VIEW FRONT VIEW
BACK VIEW
CAUTION: BEFORE PLUGGING POWER CORD INTO GROUNDED OUTLET [15A, 120V 0r 240V] MAKE SURE HEATER SWITCH IS OFF
[Heater Switch is located inside Top Housing. Remove Top Cover for Access].
I. PRIMING - FIRST TIME START UP - CONNECTED TO DIRECT WATERLINE
1. CONNECT A 1/4 Inch COPPER WATER LINE TO THE 1/4 FLARE WATER INLET FITTING ON THE VALVE.
2. PLUG POWER CORD INTO DEDICATED OUTLET [120V, 15A, GROUNDED.]
3. PRESS POWER SWITCH ON. Tank will start filling.
4. WAIT APPROX. 4 MIN. FOR TANK TO FILL UP.
5. TURN HEATER SWITCH ON [Heater Switch is located inside Top Housing. Remove Top Cover for Access].
II. NORMAL EVERYDAY BREWING OPERATION:
For LTB-303 & LTB-505:
1. Insert Paper filter with hole over stem and place tea IN PAPER FILTER - OPTIONAL
OR PLACE TEA DIRECTLY IN FUNNEL INSERT.
[for 3 gal. (1) 3 oz. bag or 2.5 - 3 oz. loose tea] [for 5 gal. (1) 4 oz. bag or 3.5 - 4 oz. loose tea]
2. Place iced tea dispenser or airpot under funnel.
3. Press Power Switch ON. Allow approx. 20 minutes for water in tank to reach brewing temperature 197°F.
4. When "Ready Light" [green] comes ON, press Brew Button [HOT TEA or ICED TEA].
For LTB-103, 105:
1. PLACE TEA BAG (3 OZ.) DIRECTLY INTO FUNNEL.
2. Place iced tea dispenser or airpot under funnel.
3. Press Power Switch ON. Allow approx. 20 minutes for water in tank to reach brewing temperature 197°F.
4. When "Ready Light" [green] comes ON, press Brew Button [HOT TEA or ICED TEA].
LTB-103
[2.5 - 3 OZ.TEA]
LTB-105
[3.5 - 4 OZ.TEA]
LTB-303
[2.5 - 3 OZ. TEA]
LTB-505
[3.5 - 4 OZ. TEA]
ICED TEA
BREW SW.
HOT TEA
BREW SW.
READY LT.
POWER
SWITCH
LABEL
FUNNEL
BREW
BASKET
SIPHONING
TUBE
WATER INLET
VALVE-HAND
TIGHTEN
POWER
CORD
LEGS
4
HEATER LT.
FAST START UP INSTRUCTIONS FOR LTB-303, 505, 103, 105