User's Manual

8 Getting Started
Charging the battery
Warning: Please only use batteries, chargers and
accessories that are approved by Philips and
compatible with your phone model. Use of other types
of batteries, chargers and accessories may violate the
warranty terms and conditions, and may cause
danger. Do not place the battery in an extremely hot
or cold environment. Keep the battery out of reach of
young children.
1. Plug the charger into an AC power outlet.
2. Plug the charger connector into the charging
socket located at the base on the top right of the
phone.
3. When charging with the phone switched on, the
charge indicators will scroll to indicate that
charging is in progress. When charging with the
phone switched off, a charging animation will
appear on the screen.
4. It normally takes around 3.5 hours* to fully
charge the battery.
5. The charge indicators stop scrolling when the
battery is fully charged. You can then disconnect
the charger from the phone.
6. Depending on the network and usage conditions,
the maximum talk time of a fully-charged battery
is 5.5 hours* and the maximum stand-by time is
280 hours*.
*The data was derived from a test conducted at our
France laboratory when the battery is fully-charged
for the first time. Depending on the network
conditions, user settings, method of use, etc the actual
results may differ.
If you do not intend to use your phone for several
days, we recommend that you remove the battery.
To protect the USB connector from being damaged
by vibration, vibra alert will be deactivated when the
charger or USB data cable is connected to the USB
connector of your phone, while the ringer will be
activated.
Note: The only way to stop charging is to unplug the
charger, so it is advisable to use an easily accessible AC
power outlet.
PhilipsC2066.book Page 8 Wednesday, May 3, 2006 5:32 PM