User's Manual

6 Getting Started
1. Getting Started
Read the safety instructions in the «Precautions»
section before use.
To use your phone, you must purchase a SIM card
from your network operator. The SIM card contains
your mobile number and subscription information.
The SIM card can be used on any GSM phone, while
your mobile phone number and subscription
information remain unchanged.
Installing and Removing battery
Install battery
1. Hold the phone with the back facing upwards,
then align and push the two protruding ends of
the battery into the two indented slots on the
phone and press the battery down until it locks
into place with the phone.
Note: The 3 metallic strips on the battery should face
the phone and aligned with the 3 metallic bars in the
battery compartment.
Remove battery
1. Release and remove the battery from its
compartment by grabbing and lifting it up
through the rectangular side opening.
Inserting and Removing SIM card
Insert SIM card
You must first purchase a SIM card from your
network operator. The SIM card contains your
mobile number and subscription information. The
SIM card can be used on any GSM phone, while the
mobile number and subscription information remain
unchanged.
1. Make sure that the phone has been switched off.
2. Remove the back cover of the phone and the
battery.
PhilipsC2066.book Page 6 Wednesday, May 3, 2006 5:32 PM