User's Manual

Settings 27
Set quick call
Quick settings
Quick settings menu allows you to activate the preset
profiles via simple operation. The current mode is
indicated with a tick on its right. Quick settings is a
set of preset attributes. Once activated, the settings of
the activated mode will be applied directly. Your
phone provides a set of default mode, which includes:
Standard , Silent , Meeting , Outdoors and Headset .
There is a set of default values for each mode (see table
below). You can customize, edit and save the settings
according to your personal preference. If a mode is
activated, the edited setting for that mode will take
effect immediately.
GPRS call When you are connected using
GPRS, whether or not your phone
will emit an alert tone to notify you
that there is a second incoming call
shall be determined by this menu.
You can select
On or Off .
Minute
reminder
You can select whether or not to use
minute reminder. i.e. whether or not
the phone will emit an alert on the
50th second of every minute when
you are on the phone.
Anykey
answer
If you set this option On , you can
press any key to answer a call, except
the red key.
Auto redial You can set auto redial option On or
Off . When set to On and the party you
wish to call is unreachable, your
phone will redial the number
automatically. There is an alert on the
screen during redial. Tap soft
key to stop redialing. Redialing will
be terminated if you use the phone
during redial.
Headset auto
answer
You can set Headset auto answer
option
On or Off . If set to On , the
phone will automatically answer the
call after 5 seconds when there is an
incoming call.
Send ID
(Network
dependent)
You can select whether or not to send
your phone number to the called
party. You can also check the status of
this option:
On or Off .
PhilipsC2066.book Page 27 Wednesday, May 3, 2006 5:32 PM