User's Manual

19 Text and number entry
For example, to input the character『王』, with the
Pinyin letters『wang』, press
9 2 6 4 and
use
> to select the desired pinyin combination for
『wang』 , then press
, to confirm combination.
After that, you may press a number key to enter the
intonation of the character (1-1 tone, 2-2 tone, 3-3
tone, 4-4 tone, 5- silent tone) to narrow down the
candidate characters selection range. Then press
>
to select the desired character 『王』 and press
,
to confirm the input of this character.
As soon as you have selected and entered a character,
the candidate list will be updated and a list of
association characters will be displayed. Press
< or >
to select the desired association character and press
,
to confirm entry. This speeds up the input process
further.
When you have finished editing a name on the
phonebook or SMS, press
c Exit to exit from
association character input mode and press
, to
confirm completion of the editing process.
Zhuyin Input
T9 Traditonal Chinese Zhuyin
Input
Press once on the key corresponding to the Zhuyin
character without having to consider its position on
the key. All the possible Zhuyin combinations will be
listed on the input row.
Characters located on each key
0 - 9 are as
follows:
Key Characters
1
ㄞㄍㄐ
2
ㄓㄢㄅㄉ
3
｜ㄗㄦㄚ
4
ㄠㄎㄑㄟ
5
ㄔㄣㄊㄆ
6
ㄨㄘㄛ
7
ㄡㄏㄒ
8
ㄕㄤㄋㄇ
Philips_XRazr.book Page 19 Tuesday, October 17, 2006 6:47 PM