User's Manual

Call 24ard
right softkey: stop/back
“C” key: Back
If the user want to switch back to the mobile LCD, he must first stop the video, and then
the control power automatically revert to mobile, the user can play video on LCD by
pen-touch or key-press event.
When the video was playing on TV, if the link between mobile and TV was interrupted,
the TV will display blue screen, but the video will not stopped till the user press stop it
himself or the video is end. The user can continue to watch television by reinsert link as long
as the video not end.
5.7 Messages
5.7.1 WAP settings
The user can set parameters of wap in this menu. The user can modify the profile settings,
create new profiles. Only 10 profiles can be add in.
Enter wap settings, select a profile, press left softkey “Option”, the menus include:
Add: Create a new profile.
Delete: Delete the selected profile, before delete, should prompt the user.
Edit: Modify the parameters of the profile. Please refer to 5.7.1.5.1.
Connect:
5.7.1.5.1 Edit profiles
The detail of each profile is as follows:
Profile name
The user can set the name of profile.
Bearer
The user can select CSD or GPRS. Please note, maybe some embed profile only can be set
CSD or GPRS.
User name： user’s name when log on WAP server.
Password： password when log on WAP server.
Gateway: IP address/port of the gateway server
5.7.2 Web browser
The user inputs website in address bar, presses OK or clicks Website to open
web page. The operation should be performed when connected.
Starting up browser will open Homepage automatically.
Title bar：Display the name of the web page, display downloading progress.
Website：An edit box to Input website. Common input is called here and
“Website” is a clickable control. Before the edit box, there are three shortcut
tool buttons are “Backward”, “Refresh” and “stop”, and behind the edit box,