User's Manual

Call 24ard
insufficient”.
Picture and video will be automatically saved to the selected storage equipment by the
default name(like img001.jpg, where 001 is increased automatically.) when shooting is over. The
taken picture is kept on the screen for 2 seconds and then the system returns to the preview status.
After shooting, the screen back to preview, press left side “Mode” key can switch to DC
player/DV Player to view the photos or videos. In DV player, press right side “Up”/”down” key
can select previous/next file, press “Multimedia” key to play/pause, press “2”/”8” key to adjust
volume. In DC player, press right side “Up”/”down” key can select previous/next file. Press left
side “Menu” key and left softkey to popup/hide sub menu(If the sub-menu was popuped, press
“mode” or “Multimedia” key to close sub menu), the sub menu includes: Delete、Edit、send，select
any option, and press “OK” or use touch pen to click it to execute.
Note: the option menu for both DC and DV are very similar. They will be listed as below.
The difference will be specified.
• Meter mode (Only in DC) (this option’s value won’t be apply for next time if the value
is changed）
There are three modes in DC: Single (default), Continuous, Self-timer 10sec.
“Single” is used to shoot one photo.
“Continuous”, is used to continuously shoot a series of photos. The interval of two
pictures depends on HW maximum speed. And fixed number (5)of photos will be taken.
Self-timer 10 sec, is used to shoot one photo with 10 seconds delay after the user presses
key to start.
• White balance(this option’s value won’t be apply for next time if the value is changed）
The user can select from one of the following items
 Auto(default),
 Sunny
 Cloudy
 Incandescent
 Fluorescent
• Night mode（only in dc， this option’s value won’t be apply for next time if the value is
changed）
Two choices：ON、Off
• Image size/quality
For the quality, the user can adjust the image compression ratio. The higher the
compression ratio, the lower the picture quality. Three quality can be selected:
quality only for DC
 Normal