User's Manual

Call 24ard
There are two means to set a hotkey: one is long press an undefined numeric key in idle state,
the other is to set the hotkey function for a numeric key in the menu.
After entering “Hotkey settings” menu, the user can browse the Hotkey list. Items in the list
is displayed in a way as follows: in the left is a key code, and in the right is the corresponding
hotkey function; if the key is not used, then “No hotkey” is displayed.
Select a hotkey and presses “OK” or left softkey, then available function list is displayed, and
the user can select a function corresponding to a key from the list. Here, the user can press “OK”
or left softkey to confirm the current setting and back to the previous screen.
When the phone is leave factory, the [1] and [#] hotkey is fixed. Long press [1] key to enter
“Voice mailbox”. Long press [#] key to on/off vibrate.
When the user set “Speed dial” hot key function, it will open an editor，the user can input
number.
Some hotkeys will be invalid when the Handset is in Restricted Idle.
The phone provide a total of 8 hotkeys ([2]-[9] keys) for the user to set a shortcut method.
The default shortcut of 8 keys are as follows, the user can change them.
5.5.7 Resource Management
5.5.7.1 Program installation
By Sync.
5.5.7.2 Resource Management
5.5.7.2.1 File Management
File management is to manage files opened to the user. From top to bottom are:“Local/SD”;
folder name or file list; Shortcut tool buttons. The left softkey is “Option”, the right softkey is
“Back”.
Local /SD：Press left./right key to switch to local flash or SD card.
Folder name：Display the name of current folder and its path.
File list：Display all files in current folder, including folders and files with icons before them
to differentiate. For folder, use touch pen first click folder is select it, and second click this folder
to enter it.
The options include：
Capacity: Display the total capacity, used capacity, left capacity etc (only when the focus on
the page header of local and SD).