User's Manual

Call 24ard
LCD sleep interval
On occurrence of the following, the LCD backlight and keyboard light will be lighted:
• Press a key
• During a period after the keyboard is released
• During a period after an accessory is connected to the Handset
• During a period after a new event occurs
• During a period after a call arrives
• During a period when the screen displays call information after a call ends.
• During a period after receipt of a message from the network
• During a period after the Handset cover is opened.
The user can set interval for 10 seconds, 30 seconds, 1 minute, 3 minutes, 5 minutes or 10
minutes.
5.5.4 Quick settings
The user can use the preset parameters by simple operation with Quick settings. The selected
mode will be marked with a sign on the right.
Quick settings are a group of preset character definitions. After one profile is activated, it will
automatically overwrite the original setting. The Handset provides a group of default profiles,
including Normal, Silent, Meeting, Outdoor and car.
For each profile, there is a set of default parameter values (see the following table), which
can be changed by the user according to his preferences and saved in the profile. If the profile has
been activated, the modified settings will become effective immediately, and will be saved
automatically.
In addition, the use can change the name of any profile at will (the length of the name is up to
16 bytes).
General Silent Meeting Outdoor Car
Call ringer alert Ringer+LED
Vibrate+LE
D
Vibrate+L
ED
Ringer+
Vibrate
Ringer
Ringer volume
Message volume
Alarm volume
volume 5 volume 1 volume 1 volume 5 volume 5
Key tone
Touch panel tone
Off Off Off On
On
Alarm clock Ringer Vibrate Vibrate
Ringer +
Vibrate
Ringer