User's Manual

Call 24ard
list on the screen. The user can select anyone and add it to the end of the preferred network list by
pressing the “Add” key.
• Add existing networks
It will be displayed in the existing networks list saved in the Handset after confirmation. The
user can select anyone and add it to the end of the preferred network list by pressing the “Add”
key.
• Add network code
The Handset will open the editor after confirmation. The user can input mobile country code
and mobile network code in turn. The code will be added to the preferred network list after
confirmation again.
Attach GPRS
The Handset supports GPRS and this option designates the time on attaching GPRS. It’s
always attached or only attached during PDP session.
Register again
The Handset will search the available network immediately after confirmation and then the
list will be displayed on the screen. The user can select one of the networks and press the
“Register” key, then the Handset tries to register the network.
5.4.8
In-Flight Mode
If the flight mode is close now, then the user select this menu, it will popup a dialog to ask
“OK to activate in-flight mode?”, press “OK” key of left softkey to active, press “C” key or right
softkey to cancel. If the user press “OK” to activate flight mode, then popup an info box to prompt
“In-flight mode activated” and the signal icon was changed.
If the flight mode is active now, then the user select this menu, it will popup a dialog to ask
“Ok to deactive
in-flight mode?”, press “OK” or left softkey to close, press “C” key or right
softkey to cancel. If the user press “OK” to close flight mode, then popup an info box to prompt
“Iin-flight mode closed” and the signal icon was changed.
The user also can active/close flight mode by click signal icon.
If the user active flight mode, then all operation related to the network can not go on.
If the user active flight mode, then the user can’t register network.
5.5 Settings
5.5.1 Sound settings
Sound settings is composed of two parts: