User's Manual

Call 24ard
the new password”) to change PIN/Call barring code.
5.4.6 Guard settings
5.4.6.2 Power on protection
If the user active “power on protection”, then the user will be required password when the
phone power on.
To set a password for power on, select it and press “OK” key to open sub menu, the user can
select “on” to active this function. Before active, the user will be required to inpute the password,
if the password is wrong, then can’t active safeguard and back to previous screen.
If the protection is active, then the user will be required password when the phone power
on.If the password input by the user is incorrect, the Handset will directly inform the user the
password is wrong and return to the previous screen. It’s not necessary to set the maximum times
for the user to input password. Otherwise, it may be very troublesome for the user go to the after
service to unlock the password.
Passwords of protection function are four-digit, “0000” as default, and the user can change
them. To change a password, first input the old password, then input a new password and repeat it
to confirm the new password.
5.4.7 Network settings
In idle state, the Handset displays the network name. If the Handset can’t identify the
network name, then it displays country code and network code.
Preferred networks
The preferred networks list is saved in the SIM card and it determines the order when the
Handset automatically registers the network.
• Show preferred networks
Enter this menu, the preferred networks list is displayed and the one on the top is of the
highest priority.
Press “up” / “down” key to select a network, and then press the softkey “Move”, this network
will be moved to the top of the preferred networks list which shows its highest priority.
• Delete preferred networks
The preferred network list will be displayed after confirmation and the user can choose a
certain network and delete it by pressing “Delete” softkey.
• Add available networks
The Handset begins to search the available network after confirmation and then display the