User's Manual

Call 24ard
Fax call active/deactive
• GPRS call：
If another voice incoming call arrives when processing a GPRS session, whether or not to
prompt the user is determined by this option. The user can select this menu and then press the
right key to activate or deactivate this option.
Send ID (need network support)
The user can choose whether to send ID(phone number) to the one who is called by this
option. There are four sub menus in this menu:on, off, default and status.
If the user select “On” or “Off”, but the network can’t accept this setting, then need to prompt
the users “The network doesn’t support!”.
5.4.5 Security settings
• PIN code
Some settings of the Handset and SIM card are protected by passwords.
• PIN code protects all services related with network except emergency calls
If the SIM card has not activate PIN function, then the user will not be required to enter PIN
when switching on the Handset. The user can activate the function by using the menu.
• Call barring
The additional service of call barring is set in the Security settings menu. This additional
service allows the user to control the type of calls. For each type, the user can activate, deactivate
or inquire the state.
Activating and deactivating call barring service requires the call barring code, which will be
sent to the network for verification.
Five type calls will be bar:
Roaming calls
All incoming calls are barred from being answered when the user is in roaming.
All incoming calls
All incoming calls are barred from being answered.
All outgoing calls
When the user attempts to dial a call, the Handset will display “dialing barred”.
Local calls only
Only those calls to the home country are allowed.
International calls
When the user attempts to make an international long-distance call, the Handset will display
“dialing barred”.
• Change PIN/Call barring code
The user can use three edit screens (“Enter the old PIN”, “Enter the new PIN”, and “Repeat