User's Manual

Call 24ard
bar.
Minute reminder
The user can select to set minute prompt sound during a call, then the Handset will give out
prompts at the 50th second of each minute after a call begins.
Any key answer
Any key can answer the incoming call except [On/Off]/ [SKR]/ [C]/ [Home] / [Up] / [Down]
/ [Left] / [Right] /[OK]key when this function is activated.
Auto redial
The user can choose to activate or deactivate the auto redial function.
When the auto redial function is activated, if the call can not be connected, the Handset will
auto redial in a certain time interval. There will be a prompt for every redialing. The auto redialing
can be canceled by pressing the key [C].
During the process of redialing, if the user uses the Handset, then redialing will exit
automatically.
Auto answer
The user can choose whether to activate the “auto answer” function, that is, the Handset will
answer the call after a short time(10 seconds) ringer when there is an incoming call.
If the phone’s cover is close and the earphone not plug in the phone, then don’t auto answer
even though the “auto answer” function is active. If earphone was plug in the phone, then can auto
answer.
Active flip
The user can answer the call after open the cover when this function is activated.
Call waiting (needs network support)
• GSM call：
If a new call arrives during a call, the Handset will display call waiting screen and let the user
choose whether to answer the second call when this function is activated. If the function is
deactivated, there will be no prompt when a new call arrives and the calling party will hear the
busy tone. The user can select this menu and then press the right key to activate, deactivate or
inquire the state.
If the user active or deactive GSM call waiting, it should affect three kinds of call at same
time, include voice call, data call and fax call. If the user inquire the state of GSM call waiting,
then it should return three kinds of state, for example:
Voice call active/deactive
Data call active/deactive