User's Manual

Call 24ard
can set forward icon on idle, and only inquire unconditional forward status when power on.
Totally, there are four types of call forward:
• Unconditional
After unconditional divert is activated, all incoming calls will be diverted to a pre-
designated number. The Handset will give out no prompt information.
• When busy
After Divert when busy is activated, an incoming call will be diverted to a preset
number if the user is busy or rejects the call.
• When no reply
After Divert when no reply, an incoming call will be diverted to a preset number if the
user doesn’t answer the call.
• Unreachable
After Divert when unable to reach is activated, an incoming call will be diverted to a
preset number if the network can’t contact the user.
The user can do the following after he selects any type of call divert:
• Enable
Select this menu, then press the right key, the user can select a number to define the
destination number of call divert service. This number can be a new input number or
from PB, or a voice mail number. Voice mail number is automatically saved in the
Handset. If there is no voice mail number, the Handset will prompt “Number is
empty” when the user activates call divert and selects “Voice mail”. The user can
input voice mail number here.
• Disable
Cancel selected call divert.
• St a t u s
Inquire the status of selected call divert. “Network connecting” displays during
inquiring. The status will be displayed after inquiring.
In addition, the user can Cancel all or Inquire all:
• Disable all
Cancel all call divert at one time.
• St a t u s
Inquire status of all call divert in one operation.
5.4.4 Call settings
The user can set the following items in Call settings menu. The user can press OK key to
activate or deactivate for the first five items and results will be displayed on the right of the menu